Product Description
Product Description
220V Constant Temperature Water Heater Control Board BW-HK165
Functions | |
1) It is for constant temperature water heater. | |
2) It combines ignition&control. | |
3) It works with a flow sensor. | |
3) It drives one DC ventilator and one DC water pump. | |
5) It drives 3pcs solenoid valves and 1pcs proportional valve. | |
6) It is with 2pcs temperature sensors and 1pcs anti-frozen connector. | |
7) Falme-out protection. | |
8) Over-heat protection. | |
9) Flue pipe block-up& high pressure protection. | |
10) It is designed with switch power supply. | |
Main technical parameters | |
Operating voltage range | 175VAC-265VAC |
Dielectric strength | no flash or break under 1800V/3s 3mA |
Leakage current | ≤0.5mA |
Insulation resistance | ≥100MΩ |
Ignition frequency | (8-18)Hz |
Ignition distance | ≥6mm |
Ignition pulse width | ≥12us |
Output hi-voltage | ≥12kv |
Ignition energy | ≥1.2mJ |
Flame detection sensitivity | 1N4007+5.1m resistance |
Flame induction cable connect to ground | ≥0.2V |
Flame induction open circuit | ≥0.8V |
Ignition time | 8±1S |
Ignition No. | 2 times |
Valve open time after ignition delay | 0.5±0.1S |
Valve open current | ≥180mA |
Valve holding current | >60mA |
Valve open voltage | ≥24V |
Valve holding voltage | ≥11V |
Valve moving pulse width | 0.5±0.1S |
Flameout safety time | ≤1S |
Pre -cleaning time | 3S±0.5S |
Temperature detection tolerance | ±1℃ |
Data memory | ok |
Resistance to wind pressure in ignition process | ok, ≥200pa |
Resistance to wind pressure in burning process | ok, ≥250pa |
Drive a 36V water pump | ok |
Performance of water proportional valve | ok |
View More